The firmness of the installation of colored Colorful Aluzinc Stone Coated Metal Roof Tile is very important, so the fixing of the installed frame is very critical.
The following is the fixing method of Jingtai Colorful Aluzinc Stone Coated Metal Roof Tile frame
1. The cross-sectional size of wooden hanging tiles is 30mm×40mm, and the surface is painted with asphalt anti-corrosion paint.
2. If the length of the roof slope is an integral multiple of the width of the steel tile, measure the distance of 365mm from the horizontal roof ridge along the slope direction of the roof before installing the tiles, and use nails to position on both sides of the horizontal direction, and then use the measuring ruler to pull the wire Measure the length of the remaining roof slope and position at 370mm intervals.
3. If the length of the roof slope is not an integral multiple of the width of the steel tiles, the top row of steel tiles needs to be cut and bent, and the distance between the horizontal roof ridge and the top hanging tiles should be less than 365mm.
4. The distance between the eaves decorative board and the second hanging tile is 345mm. Use the measuring scale to measure the length of the remaining roof, and locate the keel lap at a distance of 370mm. Nail fixed.
5. Fix the tiles on the roof according to the line of the tiles. The joints of the upper and lower tiles should be staggered, and the installation sequence of the tiles should be from bottom to top.
I hope the fixing method of the colored stone tile frame above can help you.
How is the frame fixed during the installation of Colorful Aluzinc Stone Coated Metal Roof Tile
- October 30, 2024